 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| WRA960 SERIES 3PH AC - DC DIN RAIL MOUNTABLE 960W INDUSTRIAL CONTROL EQUIPMENT FEATURES 3 PHASE AC INPUT VOLTAGE COMPACT DESIGN HIGH EFFICIENCY UP TO 93% PARALLEL FUNCTION SELECTION CHART WRA 960 - 24 Wattage 24 : 24V OUT 48 : 48V OUT MODEL LIST MODEL NO. INPUT VOLTAGE 3o 340~575VAC 3o 340~575VAC 3o 340~575VAC OUTPUT OUTPUT WATTAGE VOLTAGE Single Output Models 960 WATTS 960 WATTS 960 WATTS + 24 VDC + 24 VDC + 48 VDC OUTPUT CURRENT 40A 40A 20A EFF. (min.) 90% 90% 91% EFF. (typ.) 92% 92% 93% WRA960-24 WRA960-24L WRA960-48 SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed o GENERAL Characteristics Isolation voltage Isolation resistance Ambient temperature Derating Storage temperature Relative humidity Dimension Cooling Case material Conditions Conditions Input / Output Input / Output, @ 500VDC Operating at Vi nom Vi nom, from +61 to +71 C Non operational Vi nom, Io nom Screw terminal type Free air convection Metal o min. min. 3,000 100 -25 -25 20 typ. typ. max. max. unit unit VAC M + 71 3.5 + 85 95 o o C C %/ C o % RH mm L125.9 x W275.8 x D118.2 www.chinfa.com 2008.08.13 sales@chinfa.com WRA960 SERIES SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed INPUT SPECIFICATIONS Characteristics Nominal Voltage *1 Rated input voltage Input voltage range Rated input current Line frequency Inrush current P F. C. . Io nom Ta min ... T max, a Io nom Io nom Vi nom, Io nom Vi nom, Io nom, cold start -24, -48 Models -24L Model Vi : 500VAC, Io nom AC IN DC IN Vi : 380VAC Vi : 500VAC 47 30 50 0.7 400 340 480 2.4 1.6 63 Conditions min. typ. max. 500 575 820 unit VAC VAC VDC A A Hz A A 1o or 3o 380 / 480 VAC OUTPUT SPECIFICATIONS Characteristics Output voltage accuracy (Adjusted before shipment) Conditions Vi nom, Io max Vi nom Io nom, Vi min ...Vi max Vi nom, Io min ...Io nom Vi nom, Io min Vi nom, Io nom,BW = 20MHz Vi nom, Io nom Vi nom, Io nom 400VAC 500VAC 24V model 48V model 24V model 48V model Vi nom, Io nom 0.9 Io max Vi nom, Io nom, Po / Pi 24V model 48V model single mode parallel mode min. -0 0 typ. max. +1 1 1 5 0.02 80 unit % % % % % % / oC mV ms ms Minimum load Line regulation Load regulation Temperature coefficient Ripple & noise Hold up time Voltage trim range 14 28 22.5 47 17.6 37 17.6 37 Up to 93% 15 30 28.5 56 19.4 43 19.4 43 2 VDC VDC VDC VDC VDC VDC unit DC ON indicator threshold at start up DC LOW indicator threshold after start up Parallel operation *2 Efficiency Vi nom, Io nom CONTROL AND PROTECTION Characteristics Input fuse Rated over load protection Power Rdy *2 (for 24V model only) Vi nom Threshold voltage of contact closed(at start up) Electrical isolation Contact rating at 60VDC Conditions min. 110 17.6 500 typ. max. 130 19.4 0.3 unit % VDC VDC A V V T5A / 500VAC internal / phase Over voltage protection Output short circuit Over temperature Vi nom, Io nom (Shut down O/P voltage, re-power on to recover) 24V model 48V model 30 60 33 68 Vi nom Detect on heatsink, shut down O/P voltage, recovers automatically after temperature goes down. Current limited 100 110 o C *1. Single phase input is permissible, but output is derated to 75%. www.chinfa.com 2008.08.13 *2. 24L model no this function. sales@chinfa.com WRA960 SERIES SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed APPROVALS AND STANDARDS UL / cUL TUV CE UL508 Listed, UL60950-1 Recognized EN60950-1 EN61000-6-3, EN55022 class B EN61000-3-2, EN61000-3-3 EN61000-6-2, EN55024 EN61204-3 CIRCUIT SCHEMATIC Block diagram for WRA960 series L1 L2 L3 Fuse1 Filter Fuse2 Fuse3 Vo + X X Filter Bridge Rectifier Filter P .F.C Circuit Switching Device Rectifier Current Detection Vo - X PWM Controller Y Reference & Error Amp. Parallel Controller Vout ADJ. Parallel Bias Power Output Level Detection DC ON DC LOW RDY PHYSICAL CHARACTERISTICS CASE SIZE SCREW TERMINAL TYPE 125.9 x 275.8 x 118.2 mm (4.96 x 10.86 x 4.65 inches) 3.2kg WEIGHT DERATING 100 Power out [ % ] 65 0 -25 61 Temperature [ oC ] 71 www.chinfa.com 2008.08.13 sales@chinfa.com WRA960 SERIES MECHANISM & PIN CONFIGURATION mm [inch] 275.8 [10.86] 111.30 [4.38] 106.60 [4.20] 6.90 [0.27] WRA960 125.90 [4.96] CHINFA Chinfa Electronics ind. Co., Ltd. ISO 9001 Certified R IND.CONT.EQ. E196362 2JF4 CONSTRUCTION Easy snap-on mounting onto the DIN-Rail (TS35/7.5 or TS35/15), unit sits safeIy and firmly on the rail. INSTALLATION Ventilation / Cooling Normal convection All sides 25mm free space For cooling recommended Connector size range 10-24AWG flexible / solid cable, 8 m/m stripping at cable end recommends PIN ASSIGNMENT PIN NO. 1 2 3 4 Designation RDY RDY P G Description A normal open relay contact for DC ON level control (Never connect except 24V model) Parallel PIN for current share Parallel GEN PIN for current share Positive output terminal Positive output terminal Positive output terminal Negative output terminal Negative output terminal Negative output terminal Ground this terminal to minimize high-frequency emissions Input terminals Input terminals Input terminals Operation indicator LED DC LOW voltage indicator LED Trimmer-potentiometer for Vout adjustment 6 7 8 9 10 11 13 14 12 OUT 5 V+ V+ V+ VVVL1 L2 L3 DC ON DC LO Vout ADJ. * WRA960-24L without PIN 1, PIN 2, PIN 3, PIN 4. www.chinfa.com 2008.08.13 OTHER IN sales@chinfa.com |
Price & Availability of WRA960-24
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |